Intsimbi yeSakhiwo seKhabhoni ye-S50C

Inkcazo:

Yintsimbi yesakhiwo sekhabhoni ephakathi kwaye inamandla aphezulu. (Ihambelana nophawu lwaseTshayina: intsimbi yeNombolo 50)

Umxholo wokwakheka kweekhemikhali:

C:0.47-0.55	I-Si:0.17-0.37	Mn: 0.50-0.80	S: ≤0.035
P:≤0.035	I-Cr: ≤0.25	Nge: ≤0.30	Nge: ≤0.25

Ngokuxhomekeke kubukhulu bemveliso, kukho iindlela ezimbini zokubumba iibhilethi zentsimbi: ukubumba ngokukhululekileyo kunye nokubumba ngokufa. Ukubumba ngokukhululekileyo kusetyenziswa kakhulu kwimveliso yebhetshi encinci nephakathi, kwaye ukubumba ngokufa kusetyenziswa kwimveliso enkulu. Ngokweemeko zokusebenza ezahlukeneyo kunye neemfuno zokusetyenziswa, kukhethwa izixhobo ezahlukeneyo kwaye iinkcukacha ezahlukeneyo zonyango lobushushu (ezifana nokucinywa nokufuthwa, ukulungelelanisa, ukucima, njl.njl.) zisetyenziselwa ukufumana inqanaba elithile lamandla, ukuqina kunye nokumelana nokuguguleka.

Nceda undithumelele umbuzo
ngokobukhulu bakho kunye neemfuno zakho

iinkcukacha zemveliso

Iimpawu zentsimbi yesakhelo sekhabhoni ye-S50C

1. Intsimbi inesakhiwo se-metallographic esifanayo kwaye ayinaziphene kwisakhiwo.

2. Le ntsimbi yinto esetyenziswa kakhulu kwiindawo zeshaft. Ixabiso liphantsi. Emva kokuyicima nokuyithambisa (okanye ukuyilungisa), inokufumana ukusebenza okungcono kokusika, kwaye inokufumana amandla aphezulu, ukuqina kunye nezinye iimpawu zoomatshini ezipheleleyo.

3. Ngenxa yokuba olu hlobo lwentsimbi luneempawu ezintle zoomatshini, lusetyenziswa kakhulu ekwenzeni oomatshini. Kodwa le yintsimbi yekhabhoni ephakathi kwaye ukusebenza kwayo kokucima akulunganga.

4. Intsimbi yesakhiwo sekhabhoni enamandla aphezulu ekhabhoni ephakathi inamandla aphezulu kwaye ilukhuni emva kokucima. Intsimbi inamandla aphakathi okusebenza, i-plasticity ephantsi yokuguquguquka kobushushu, i-weldability ephantsi, i-fracture yobushushu ayibi buthathaka ngexesha lonyango lobushushu, kodwa ilukhuni kancinci. Kwaye kukho umkhwa wokuqhekeka ngexesha lokucima amanzi.

5. Le ntsimbi idla ngokusetyenziswa emva konyango lobushushu olufana nokulungisa okanye ukucima kunye nokushisa, okanye ukucima umphezulu oqhelekileyo.

6. Amandla nobunzima bayo buphezulu kune-S45C, kodwa ukuqina kwayo kunye nokuqina kwayo kubi kune-S45C.

inkcazo2

Ububanzi bokusetyenziswa kwentsimbi yesakhiwo sekhabhoni ye-S50C

1. Ifanelekile ukuvelisa iindawo zoomatshini ezinomthwalo ophantsi oguqukayo, umthwalo ophantsi wempembelelo kunye nokumelana okuhle kokuguguleka, njengeegiya ezibunjiweyo, iidiski zokungqubana kweshaft, iispindle zezixhobo zomatshini, iispindle zenjini, iirola, iintonga zokubopha, iiwashers zasentwasahlobo, njl.njl.;

2.Ifanelekile ukuvelisa iindawo zokubumba ezineemfuno eziphezulu zokuxhathisa ukuguguleka, umthwalo omkhulu onamandla kunye nempembelelo;

3. Isetyenziselwa ukwenza iindawo kwiiturbine zomphunga ezingachaphazeleki kakhulu, ezifana nee-crankshafts, ii-main shafts, iigiya kunye neefreyimu ze-mold, njl.njl.

Inkampani iSanyao inokubonelela abathengi nge-forging eyenzelwe wena (kubandakanya ubungakanani, ubulukhuni, i-eye bolt, i-rough machining, i-quenching kunye ne-tempering, i-rough surface grinding, i-fine surface grinding, njl.njl.) ukuhlangabezana neemfuno zabathengi ngabanye.