Intsimbi yeH13/1.2344/ 4Cr5MoSiV1

Inkcazo:

I-H13 yeyentsimbi eshushu esebenza njenge-die steel, eluhlobo lwentsimbi eyenziwe ngokongeza izinto ezidibanisa i-alloying kwintsimbi ye-carbon industrial.

(Ihambelana nophawu lwaseTshayina: 4Cr5MoSiV1, uphawu lwaseJamani: 1.2344)

Umxholo wokwakheka kweekhemikhali:

C:0.32-0.45	Ewe: 0.80 -1.20	Mn:0.20-0.50	S: ≤0.030
P: ≤0.030	I-Cr:4.75-5.50	Nge: 1.10-1.75	H:0.80-1.20

Nceda undithumelele umbuzo
ngokobukhulu bakho kunye neemfuno zakho

iinkcukacha zemveliso

Iimpawu zentsimbi ye-H13 mold

1.Inokuqina okuphezulu kunye nokuqina okuphezulu.

2.Iyakwazi ukumelana kakuhle nokuqhekeka kobushushu, kwaye ingapholiswa ngamanzi kwindawo yokusebenza.

3.Inokumelana nokuguguleka okuphakathi. Iinkqubo ze-carburizing okanye ze-nitriding nazo zingasetyenziselwa ukuphucula ubulukhuni bomphezulu wayo, kodwa ukumelana nokuqhekeka kobushushu kuya kuncipha kancinci.

4. Ngenxa yomxholo wayo ophantsi wekhabhoni, amandla okuqina okwesibini ngexesha lokufudumala aphantsi.

5.Iyakwazi ukumelana nokuthamba xa kushushu kakhulu, kodwa ubunzima buyehla ngokukhawuleza xa ubushushu bokusebenza bungaphezulu kwama-540℃ (1000℉) (oko kukuthi, ubushushu bokusebenza enokumelana nabo yi-540℃).

6. Ukuguqulwa okubangelwa kunyango lobushushu kuncinci.

7.Ukusebenza okuphakathi nokuphezulu.

8. Ukumelana okuphakathi kokungasuswa kwekhabhohayidreyithi.

Ngamafutshane, intsimbi yokubumba ye-H13 inokuqina okuhle, iipropati ezilungileyo zoomatshini ezibanzi kubushushu obuphezulu, ukumelana kakuhle nobushushu kunye nokudinwa kubushushu, kunye nokumelana okuhle nokukhukuliseka kwesinyithi esilulwelo.

inkcazo2

Ububanzi obusebenzayo bentsimbi yokubumba ye-H13

1. Isetyenziselwa ukwenza ii-dies zokubumba ezinemithwalo emikhulu yempembelelo, iimilo ezintsonkothileyo kunye nokuchaneka okuphezulu;

2. Isetyenziswa kwiidayi zesando zokuyila, iidayi zokuyila ezisebenzisa i-aluminium alloy, iidayi ze-extrusion ezishushu, iidayi ze-forging ezichanekileyo ngesantya esiphezulu kunye needayi ze-press zokuyila, njl.njl.;

3. Isetyenziselwa ukwenza iifilimu zeplastiki ezifuna ubomi obude benkonzo.

Inkampani iSanyao inokubonelela abathengi nge-forging eyenzelwe wena (kubandakanya ubungakanani, ubulukhuni, i-eye bolt, i-rough machining, i-quenching kunye ne-tempering, i-rough surface grinding, i-fine surface grinding, njl.njl.) ukuhlangabezana neemfuno zabathengi ngabanye.